Comac Horizontal Hydraulic Section Benders

Sale Date 21st June

Viewing 20th June

Location: Newton Aycliffe Industrial Estate

Collection No Later Than 28th June
Please note that there are no lifting facilities at this site. Buyers will need to organise their own collection.

Description

Model Leonardo 5H, Serial No 500217, MFD 2007, Shaft Diameters 50mm, Diameter of Roll 175mm, Rolling Speed 4.4m/min, Capacity Flats on Edge 80 x 8mm  Min ID 800mm, 25 x 8mm Min ID 200mm, Flats Vertical 120 x 20mm Min ID  800mm  30 x 10mm Min ID 240mm, Square 40 x 40mm Min ID 1200mm, 15 x 15mm Min ID 200mm, rounds 45 dia Min ID 1000mm, 25mm dia Min ID 300mm, Tube 80 x 2.5mm Min ID 2000mm, 20 x 2mm Min ID 200mm, 60.3 x 4.5mm Min ID 800mm, 26.9 x 2.9mm Min ID 300mm, Box 60 x 30 x 4mm Min ID 1500mm, 40 x 20 x 3mm, Min ID 800mm, 60 x 60 x 3mm Min  ID 3000mm, 20 x 20 x 2mm Min ID 400mm, Angle Toe Out 60 x 6mm Min ID 600mm, 25 x 3mm Min ID 400mm, Angle Toe In 60 x 6mm Min ID 1000mm, 25 x 3mm  Min ID 600mm, T Section Toe Out 60 x 60 x 7mm Min ID 600mm, 20 x 20 x 3mm Min ID 200mm, Toe In 60 x 60 x 7mm Min ID 700mm, 20 x 20 x 3mm Min ID 200mm, T section on Edge 70 x 70 x 8mm Min ID  600mm, 20 x 20 x 3mm Min ID 200mm, Chanel Section Toe Out 80 x 45 Min ID 600mm, 30 x 15mm Min ID 600mm, 30 x 15mm Min ID 300mm, Toe In 80 x 45mm  Min ID 600mm, 30 x 15mm Min ID 300mm. Complete With 1 Set Of Section Formers, 1 Set Of Tube Formers, Approximate Dimensions 1200 x 800 x 1350mm, Approximate Weight 500kg