GLEASON 645 G PLETE HYPOID SPIRAL BEVEL GEAR GENERATOR
HYPOID SPIRAL BEVEL GEAR GENERATOR
Please note the lot is subject to Buyer's Premium and VAT.
Date: 9th June 2021
Viewing: Strictly by Appointment with Covid regulations in place
Please note that all good are sold ‘ex works’ and that the responsibility of all export documentation is with the purchaser.
Serial No 770502, Model 645 G Plete, MFD 1980, Capacities Extreme Ratios 10:1, Root Angle Range -8° to 90°, Gear Diameter Maximum
Outer Cone Spiral Cutter
Distance Angle Diameter
361.2mm 29.75° 304.8mm
356.9mm 30° 406.4mm
378mm 35° 457.2mm
Maximum Radial Settings 266.7mm, Pitch Coarsest 1.5 DP / 16.9 MOD, Face Width Maximum 116.8mm, Full Depth 31.8mm, Index Range 5 – 80 Inclusive, Work Spindle Diameter of Taper Hole At Large End 152.4mm, Taper Per Foot 19.05mm, Depth of Taper 152.4mm, Diameter of Hole Through Spindle 127mm, Cutter Diameters 9, 12, 16, 18”, Work Head Settings, Offset Above Centre Maximum 114.3mm, Offset Below Centre Maximum 114.3mm, Machine Centre to Nose of Spindle Maximum 596.9mm, Cutter Speeds 19 – 167 Rpm Stepless, Feeds Infinitely Variable Per Tooth 7 Seconds Minimum, Electrics 415v, 3ph, 50 Cycles, Cutter Motor 15 Hp, Approximate Dimensions 3556 x 2032 x 2100mm, Approximate Weight 26,490kg
|Buyer's Premium||18% of Winning bid.|